Krystol™ Concrete Waterproofing: It's the intelligent, self-sealing water-protection system that transforms concrete into a powerful water-resistant barrier. Krystol relies on a revolutionary crystalline technology that turns porous concrete into an impermeable barrier. The result is a structure with reduced cracking, self-sealing and water-resistant abilities that provide a powerful defense against water damage and corrosion of reinforcing steel.

So whether it's new construction, upgrading an existing structure or repairing cracks, Krystol will help you build the quality, reliability and cost-effectiveness into the concrete.

KRYSTOL™ WATERPROOFING ADMIXTURE SYSTEMS
Krystol Internal Membrane™ - KIM™ (K-300, 301)
KIM is the world's only permanent, self-sealing, corrosion-free, concrete waterproofer. KIM is a chemical admixture used for the treatment of concrete and concrete products to protect against water intrusion, leakage, cracking, chemical attack, and corrosion of reinforcing steel. KIM is a more reliable and cost-effective alternative to traditional waterproofing membranes because KIM turns the concrete itself into the membrane.
TDS	MSDS
Krystol T1® & T2®
KRYSTOL T1 & T2 Waterproofing System is a cementitious, brush-applied, treatment for concrete. KRYSTOL T1 & T2 contain the proven world-renowned Krystol waterproofing chemicals. KRYSTOL T1 is applied to the concrete first followed by KRYSTOL T2. When applied in accordance with manufacturer's specifications, the Krystol system is warranted for use in place of conventional waterproofing systems. KRYSTOL T1 & T2 react chemically within the concrete mass to form billions of needle-like crystals which block the pores, voids and microcracks in concrete. Presaturation and subsequent re-wetting of the surface will cause deeper diffusion of the organic chemicals and formation of crystals at greater depth.
TDS	MSDS
KRYSTOL™ CRACK REPAIR & SURFACE TREATMENT SYSTEMS
Krystol™ Plug (K-620)
KRYSTOL PLUG is a powder that, when mixed to a stiff-dough consistency with water, may be used to immediately arrest the seepage or flow of water through concrete cracks. Within two minutes, Krystol Plug sets to a completely waterproof seal and continues to harden until its strength exceeds that of the concrete onto which it has been applied.
TDS	MSDS
Krystol Baricote (K-315)
Krystol Baricote is a fast-setting waterproof grout that is specially designed to repair leaking cracks, holes and joints in concrete as outlined in Technical Bulletins 101 & 102. Krystol Baricote contains special ingredients that react chemically with concrete to form millions of needle shaped hydration crystals. These crystals grow deep into the capillary pores of the grout and surrounding concrete to block the passage of water.
TDS	MSDS
KRYSTOL™ WATERSTOP SYSTEM
Krystol™ Waterstop Grout (K-322)
Krystol™ Waterstop Grout is a specially formulated powder containing the proven chemistry of Krystol integral crystalline waterproofing. Krystol Waterstop Grout is a primary component of the Krystol Waterstop System and is used to create concrete construction joints that are permanently waterproof. The active ingredients in Krystol Waterstop Grout combine chemically with water and concrete to form millions of needle-shaped crystals that grow in all directions to fill any capillary pores, cracks and joints that might otherwise allow water to pass.
TDS	MSDS
Krystol™ Waterstop Treatment (K-321)
Krystol™ Waterstop Treatment is a specially formulated powder containing the proven chemistry of Krystol integral crystalline waterproofing. Krystol Waterstop Treatment is a primary component of the Krystol Waterstop System and is used to create concrete construction joints that are permanently waterproof. The active ingredients in Krystol Waterstop Treatment combine chemically with water and concrete to form millions of needle-shaped crystals that grow in all directions to fill any capillary pores, cracks and joints that might otherwise allow water to pass.
TDS	MSDS