Feature of PENGUIN FOAM® (1 Component Material)

Penguin Foam® (Heat-curing type) material enabling the snap curing (a few minutes at 80 degrees) and superior adhesion to various types of plastic materials. It provides 1 part superior applicability compared to two part type materials. Also Penguin Foam® possesses enhanced heat resisting property which has never been achieved with urethane materials before.

1 Component:
No need for controlling pot life which plagued 2 part type applications. Also the time it takes for the maintenance of mixing part and purging can be greatly reduced.

Low temperature. Fast curing:
We have developed the original curing agent technology which enables fast curing at 80 degrees to produce the elastic state of the cured material.

Micro Capsule foaming:
The specialized mechanical foaming system provides micro cell foaming. The robot application(foaming) at room temperature enables string(line) formation, injection molding, foam filling, and other molding applications.

Enhanced heat resisting property:
Also it has achieved far enhanced heat resisting property compared to general polyurethane material.

(Low hardness Type):
PENGUIN FOAM® demonstrates flexible rubber like property and provides very good gasket applications. Foaming magnification rate can be easily adjusted with the setting of the special equipment.(up to 300°)

(High strength Type):
PENGUIN FOAM® demonstrates elastic rubber like property and provides very good foaming rubber applications. Foaming magnification rate can be easily adjusted with the setting of the special equipment.(up to 300°)

Future of FOAMPLY® (Mechanical Foaming Machine)
FOAMPLY® provides uniform foam by mixing single component paste materials with air, using our patented mechanical foaming device.

Low Pressure Air Method:
By introducing low pressure air method, the handling safety and reliability of air injection are greatly improved.(Patented)

- Facilitate control of mixed ratio - Increase reliability of mixing - Increase safety of air handling

Uniform Dispersion is Created Through Properties:
The capability to simplify the foaming apparatus and provide uniform foaming by utilizing these characteristics of air dispersion for flow ability. (Patented)
- Simplification of foaming apparatus
- Produce the finer foam than in dynamic mixing

Precise Control of Discharge Quantity:
Cylinder method stabilizers the discharge quantity and it can be applied to various component shapes.
- Produce constant shape of gaskets
- Apply to any complicated shape

Compact gun:
3 dimensions of application is easy and even a small-sized robot can handle.(approximately 1.5kg)

Room temperature foaming, Room temperature application:
The standby time problem of the heating of HOTMELT type is unnecessary, and production energy can be reduced. The safety issues of high temperature material are not factors.

Total system development and support:
Material and application system are developed and recommended only after detailed date is reviewed of which evidence can be provided.